Код: Выделить всё
@173000g
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
Step 1 2 3 4 5 6 7 8 9
Message 04 Entering Dialog mode
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO ZB1
Trying ZB1
Starting system from ZB1
RT-11SB (S) V05.07
.R MSCPCK
.ini dl2:
DL2:/Initialize; Are you sure? Y
.cop/ver/sys/excl sy:*.dsk dl2:
Files copied:
SY:SWAP.SYS to DL2:SWAP.SYS
SY:RT11SB.SYS to DL2:RT11SB.SYS
SY:RT11FB.SYS to DL2:RT11FB.SYS
SY:RK.SYS to DL2:RK.SYS
.....
SY:TSYA10.COM to DL2:TSYA10.COM
SY:TDL0NL.COM to DL2:TDL0NL.COM
SY:TDL0.COM to DL2:TDL0.COM
SY:TSYDL0.COM to DL2:TSYDL0.COM
.cop/boo dl2:rt11zm dl2:
.
147250
@173000g
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
Step 1 2 3 4 5 6 7 8 9
Message 04 Entering Dialog mode
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO DL2
Trying DL2
Starting system from DL2
RT-11ZM (S) V05.07
.TYPE V5USER.TXT
RT-11 V5.7
Installation of RT-11 Version 5.7 is complete and you are now running
......
contain much of the information you need to use RT-11 Version 5.7.
.R MSCPCK
.sho all
RT-11ZM (S) V05.07
Booted from DL2:RT11ZM
22 bit addressing is on
USR is set NOSWAP
EXIT is set SWAP
KMON is set NOIND
RUN is set NOVBGEXE
MODE is set NOSJ
TT is set NOQUIET
ERROR is set ERROR
SL is set OFF
EDIT is set KEX
FORTRAN is set FORTRA
KMON nesting depth is 3
Global .SCCA flag is disabled
CLI is set DCL, CCL, UCL, NO UCF
PDP 11/83 Processor
4088KB of memory
Floating Point Accelerator Unit
Extended Instruction Set (EIS)
Memory Management Unit
Parity Memory
Cache Memory
PMI Memory
50 Hertz System Clock
Memory parity support
Global .SCCA support
FPU support
Extended unit support
Device Status CSR Vector(s)
------ ------ --- ---------
RK Not installed 177400 220
DL Resident 174400 160
DU Installed 172150 154
HX Installed 177560 000
ZA Installed 161014 350
ZB Installed 161054 354
ZC Installed 161114 360
ZD Installed 161154 364
ZE Not installed 161214 370
ZF Not installed 161254 374
WQ Not installed 177134 204
WS Not installed 177134 204
LD Installed 000000 000
VM Installed 177572 000
MU Not installed 174500 260
NL Installed 000000 000
SL Installed 000000 000
NQ Not installed 174440 120
TT (Resident)
DL (Resident)
DL2 = DK , SY
MQ (Resident)
HX
ZA
ZB
ZC
DU
VM
ZD
LD
NL
SL
15 free slots
Job Name Console Level State Low High Impure
--- ---- ------- ----- ----- --- ---- ------
0 RESORC 0 0 Run 000000 100564 115176
No multi-terminal support
------- Extended Memory --------
Address Module Words Type
------- ------ ----- ----
17760000 IOPAGE 4096. PRM HDW BYP
17760000 MEMTOP
00760000 VM 1966080. SHR
00220300 ...... 90016.
00205700 SL 2688. PVT
00163000 DU 4832. PVT
00160000 MCA 768. PRM
00000000 KERNEL 28672. PRM HDW
------ Low Memory -------
Address Module Words
------- ------ -----
155332 DL 659.
112630 RMON 8865.
100566 USR 2577.
001000 ..BG.. 16315.
LD0 is ZB3:S00.DSK[1950.] #
# Handler not loaded
.
137134
@173000g
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
Step 1 2 3 4 5 6 7 8 9
Message 04 Entering Dialog mode
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO DL0
Trying DL0
Starting system from DL0
RSX-11M-PLUS V4.6 BL87 2044.KW System:"DE10 "
>RED DL:=SY:
>RED DL:=LB:
>RED DL:=SP:
>MOU DL0:"RSX11MPBL87"
>@DL:[1,2]STARTUP
>; PLEASE NOTE
>;
>; If you have not yet read the system release notes, please do so
>; now before attempting to perform a SYSGEN or to utilize the new
>; features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: 19:11 15-may-2021
>TIME 19:11 15-may-2021
>ACS SY:/BLKS=1024.
>CON ONLINE ALL
>ELI /LOG/LIM
>CLI /INIT=DCL/CTRLC/DPR="<15><12>/$ /"
>INS LB:[1,1]RMSRESAB.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBL.TSK/RON=YES/PAR=GEN
>INS LB:[1,1]RMSLBM.TSK/RON=YES/PAR=GEN
>INS $QMGCLI
>INS $QMGCLI/TASK=...PRI
>INS $QMGCLI/TASK=...SUB
>QUE /START:QMG
>INS $QMGPRT/TASK=PRT.../SLV=NO
>QUE LP0:/CR/NM
>START/ACCOUNTING
>CON ESTAT LP0:
>QUE BAP0:/BATCH
>QUE BAP0:/AS:BATCH
>@ <EOF>
>dev dl:
DL0: Public Mounted Loaded Label=RSX11MPBL87 Type=RL02
Seek_Optimization=Nearest:10.
DL1: Loaded Type=RL02
Seek_Optimization=Nearest:10.
DL2: Loaded Type=RL02
Seek_Optimization=Nearest:10.
DL3: Loaded Type=RL02
Seek_Optimization=Nearest:10.
>mou dl1:/for/nowr
>mou dl3:/for
>bru/ini/ver dl1: dl3:
MCR -- Task not in system
>ins $bru
>bru/ver/ini dl1: dl3:
BRU - Starting verify pass
19:15:54 Login failure INVALID USER TT4:
19:16:06 Login user SYSTEM [1,1] TT4:
BRU - Completed
>
19:19:30 Login user SYSTEM [1,1] TT1:
19:19:34 Logout user SYSTEM [1,1] TT1:
19:19:38 Logout user SYSTEM [1,1] TT4:
run shutup
>
RSX-11M-PLUS Shut down program
Enter minutes to wait before shutdown:
Reason for shutdown (<CR> for none):
OK to shutdown? [Y/N]: y
All further logins are disabled
15-MAY-2021 19:19 System is now shutting down -- DE10
QUE /STO:QMG
>
STOP/ACCOUNTING SHUTUP
19:19:59 SYSLOG -- 47. Exiting
@LB:[1,2]SHUTUP
>
>VCP DISCONNECT /ALL
>@ <EOF>
>
ELI /NOLOG
>
ACS DL0:/BLKS=0.
ACS -- Checkpoint file now inactive
>
DMO DL0:/DEV/LOCK=V
DMO -- System disk being dismounted
DMO -- SYSTEM dismounted from DL0: *** Final dismount initiated ***
19:20:01 *** DL0: -- Dismount complete
>
DMO DL1:/DEV/LOCK=V
19:20:06 *** DL1: -- Dismount complete
DMO -- TT0: dismounted from DL1: *** Final dismount initiated ***
>
DMO DL3:/DEV/LOCK=V
19:20:11 *** DL3: -- Dismount complete
DMO -- TT0: dismounted from DL3: *** Final dismount initiated ***
>
SHUTUP operation complete
126130
@173000G
Testing in progress - Please wait
Memory Size is 4088 K Bytes
9 Step memory test
Step 1 2 3 4 5 6 7 8 9
Message 04 Entering Dialog mode
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: BOO DL3
Trying DL3
Starting system from DL3
RSX-11M-PLUS V4.6 BL87 2044.KW System:"DE10 "
>RED DL3:=SY:
>RED DL3:=LB:
>RED DL3:=SP:
>MOU DL3:"RSX11MPBL87"
>@DL3:[1,2]STARTUP
>; PLEASE NOTE
>;
>; If you have not yet read the system release notes, please do so
>; now before attempting to perform a SYSGEN or to utilize the new
>; features of this system.
>;
>;
>* Please enter time and date (HH:MM DD-MMM-YYYY) [S]: ^Z
>@ <EOF>
>RUN SHUTUP
>
RSX-11M-PLUS Shut down program
Enter minutes to wait before shutdown:
Reason for shutdown (<CR> for none):
OK to shutdown? [Y/N]: Y
All further logins are disabled
30-MAR-1982 00:00 System is now shutting down -- DE10
@LB:[1,2]SHUTUP
>VCP DISCONNECT /ALL
>@ <EOF>
>
DMO DL3:/DEV/LOCK=V
DMO -- System disk being dismounted
DMO -- SYSTEM dismounted from DL3: *** Final dismount initiated ***
00:00:28 *** DL3: -- Dismount complete
>
SHUTUP operation complete
126130