TSeng ET6000, 6100 vs остальные

Описания, советы, ремонт, эксплуатация старых IBM PC-совместимых ПК
Аватара пользователя
Takedasun
Advanced Member
Сообщения: 4206
Зарегистрирован: 16.10.2013,18:07
Откуда: Керчь
Благодарил (а): 13 раз
Поблагодарили: 24 раза

Вклад в сообщество

TSeng ET6000, 6100 vs остальные

Сообщение Takedasun » 15.11.2026,15:05

rkurbatov писал(а): 27.10.2026,21:49 32 бита, каждая микросхема 16-битная.
Как интересно, всего лишь 32 бита.

- MDRAMs are synchronous Multibank DRAMs
synchronous means they have a central clock to which all
signals are synchronized
- the current MDRAMS are specified for a clockspeed of 100 MHz
- data and adress information transfer goes over a 16 bit wide bus
which works at double clockspeed (transfers on both clock signal
transitions) which results in a theoretical peak transfer rate
of 400 MByte/s for a single MDRAM (1 or 1.25 MByte)
- ET6000 has two 16 bit wide MDRAM ports, it must therefore be connected
to 2 MDRAMs (usually 1 MB each, making a minimum of 2 MB) for
maximum performance
- the ET6000s currently delivered by Tseng and used on the tested
video cards have a specified memory clock of 85 MHz
- Videologic uses 85 MHz, Hercules overclocks (or gets selected chips)
with 90 MHz
- the estimated average memory bandwidth for these card is
500-600 MByte/s
- by using MDRAM the ET6000 can reach the double performance compared
to a standard 64 bit graphic card with EDO DRAM, with only 32 bit
wide (two 16bit MDRAM ports) video data memory interface
- the current max. pixelclock is 135MHz
- Tseng Labs has not yet reached its goal of using 100MHz memory clock
and 170 MHz pixel clock
- the announced max. bandwidth of 1 GByte/s requires 125MHz memory clock

Ответить